Wear and frictional behaviour of high strength steel in stamping monitored by acoustic emission techniqueSKARE, T; KRANTZ, F.Wear. 2003, Vol 255, Num 2, pp 1471-1479, issn 0043-1648, 9 p.Conference Paper

Constant-load delayed fracture test of atmospherically corroded high strength steelsAKIYAMA, Eiji; MATSUKADO, Katsuhiro; SONGJIE LI et al.Applied surface science. 2011, Vol 257, Num 19, pp 8275-8281, issn 0169-4332, 7 p.Conference Paper

The problem of welding high strength steels = Le soudage des aciers à haute résistanceGOTAL'SKII, YU. N.Automatic Welding. 1984, Vol 37, Num 6, pp 37-40, issn 0005-108XArticle

Advanced high strength steels for automotive industryGALAN, J; SAMEK, L; VERLEYSEN, P et al.Revista de metalurgia (Madrid). 2012, Vol 48, Num 2, pp 118-131, issn 0034-8570, 14 p.Article

UNTERSUCHUNGEN ZUR HERSTELLUNG VON HOEHERFESTEN STAHLDRAEHTEN AUS STRANGGUSSVORMATERIAL = STUDIES ON THE MANUFACTURE OF HIGHER-STRENGTH STEEL WIRE FROM CONTINUOUS CASTED STOCKKARL A; PETZOLD KM; PETERS R et al.1981; NEUE HUETTE; DDR; DA. 1981-02; VOL. 26; NO 2; PP. 47-51; BIBL. 20 REF.Article

The change of steel surface chemistry regarding oxygen partial pressure and dew pointNORDEN, Martin; BLUMENAU, Marc; WUTTKE, Thiemo et al.Applied surface science. 2013, Vol 271, pp 19-31, issn 0169-4332, 13 p.Article

Detection of stress corrosion cracking of high-strength steel used in prestressed concrete structures by acoustic emission techniqueRAMADAN, S; GAILLET, L; TESSIER, C et al.Applied surface science. 2008, Vol 254, Num 8, pp 2255-2261, issn 0169-4332, 7 p.Article

Effects of hoop reinforcement in steel and reinforced concrete composite sections = Effet de renforcement par des frettes de sections composites en béton armé et acierSUZUKI, T; TAKIGUCHI, K; ICHINOSE, T et al.Bulletin of the New Zealand National Society for Earthquake Engineering. 1984, Vol 17, Num 3, pp 198-214, issn 0110-0718Article

Three-dimensional cold bending and welding residual stresses in penstock of 80 kgf/mm² class high strength steel plate = Pliage à froid tridimensionnel et contraintes résiduelles de soudage dans les conduites forcées en acier à haute résistance de 80 kgf/mm²UEDA, Y; FUKUDA, K; NISHIMURA, I et al.1983, Vol 12, Num 2, pp 117-126Article

Developments in material and material selection for offshore welded structures = Mise au point et choix des matériaux pour structures offshore soudéesBESSYO, K; SUZUKI, M; PISARSKI, H. G et al.Offshore welded structures. Second international conference. 1983, 68 p.Conference Proceedings

Corrosion fatigue behaviour of high strength steels and welded joints for offshore structures = Comportement en fatigue sous corrosion d'aciers à haute résistance et de joints soudés dans le cadre de la construction d'ouvrages en merEBARA, R; YAMADA, Y; FUJISHIMA, K et al.Fundamental and practical approaches to the reliability of welded structures. International symposium. 1982, pp 327-332Conference Paper

High strength steel: crisis or no? = Acier à haute résistance: est-ce la crise?GODFREY, K. A.Civil engineering ASCE. 1985, Vol 55, Num 5, pp 50-53, issn 0360-0556Article

On the improvement of fatigue resistance and Safety of butt welds = Amélioration de la résistance à la fagigue et de la fiabilité des soudures bout à boutZHENG XIULIN; LIU YAN; XIE ZHENGTAO et al.Quality and reliability in welding. International conference. Collection of papers. 1984, pp XIII.2.1-XIII.2.5Conference Paper

Nonrelevant magnetic particle indications = Indications fausses du contrôle par poudres magnétiquesBROUGH, L. A.Metal progress. 1983, Vol 124, Num 4, pp 41-42, issn 0026-0665Article

Hydrogen permeation in high strength steel under load in aqueous environmentKIM, S. J; KIM, K. Y.Corrosion engineering, science and technology. 2014, Vol 49, Num 2, pp 136-142, issn 1478-422X, 7 p.Conference Paper

Carbides and mechanical properties in a Fe―Cr―Ni―Mo high-strength steel with different V contentsTAO WEN; XIAOFENG HU; YUANYUAN SONG et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2013, Vol 588, pp 201-207, issn 0921-5093, 7 p.Article

Estimation of maximum inclusion size and fatigue strength in high-strength ADF1 steelZHANG, J. M; ZHANG, J. F; YANG, Z. G et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2005, Vol 394, Num 1-2, pp 126-131, issn 0921-5093, 6 p.Article

Early detection and monitoring of fatigue in high strength steels with MWM-ArraysZILBERSTEIN, V; GRUNDY, D; WEISS, V et al.International journal of fatigue. 2005, Vol 27, Num 10-12, pp 1644-1652, issn 0142-1123, 9 p.Conference Paper

Evaluation of CTOA from load vs. load-line displacement for C(T) specimenXU, S; PETRI, N; TYSON, W. R et al.Engineering fracture mechanics. 2009, Vol 76, Num 13, pp 2126-2134, issn 0013-7944, 9 p.Article

Stability and ductility of thin high strength G550 steel members and connectionsROGERS, C. A; YANG, D; HANCOCK, G. J et al.Thin-walled structures. 2003, Vol 41, Num 2-3, pp 149-166, issn 0263-8231, 18 p.Article

The influence of applied stress rate on the stress corrosion cracking of 4340 and 3.5NiCrMoV steels in distilled water at 30 °CRAMAMURTHY, S; ATRENS, A.Corrosion science. 2010, Vol 52, Num 3, pp 1042-1051, issn 0010-938X, 10 p.Article

Hydrogen entry into Fe and high strength steels under simulated atmospheric corrosionAKIYAMA, Eiji; SONGJIE LI; SHINOHARA, Tadashi et al.Electrochimica acta. 2011, Vol 56, Num 4, pp 1799-1805, issn 0013-4686, 7 p.Conference Paper

NEAR-THRESHOLD FATIGUE CRACK PROPAGATION IN ULTRA-HIGH STRENGTH STEEL: INFLUENCE OF LOAD RATIO AND CYCLIC STRENGTH.RITCHIE RO.1977; J. ENGNG MATER. TECHNOL.; U.S.A.; DA. 1977; VOL. 99; NO 3; PP. 195-204; BIBL. 35 REF.Article

ON HIGH STRAIN FATIGUE BEHAVIOUR OF A HIGH STRENGTH LOW ALLOY STEEL.GARG SK; SINGH V; RAMA RAO P et al.1977; SCRIPTA METALLURG.; E.U.; DA. 1977; VOL. 11; NO 7; PP. 593-596; BIBL. 6 REF.Article

SEGREGATION DENDRITIQUE DANS LES ASSEMBLAGES SOUDES EN ACIER MOYENNEMENT ALLIE A HAUTE RESISTANCETRUSOV YU A; LAZ'KO VE; KUROCHKO RS et al.1976; SVAROCH. PROIZVOD.; S.S.S.R.; DA. 1976; NO 5; PP. 17-18; BIBL. 13 REF.Article